Z80 Lasers - REAL 8W+ Engraving/Cutting Power! DIY CNC Upgrade Module & Kit 100W. This product data sheet is originally written in English. This listing is for one Z80 Lasers 8+ Watt Laser Engraving Module or Laser Engraving Kit for use with a CNC or 3D Printing machine. 8+ Watt Laser Engraving Module Features.
Z80 Lasers 8+ Watt Z80_8W450B9 450nm Laser Diode This is the most powerful visible light laser diode currently available. Most other sellers are trying to pass off inferior diodes as 10, 15, 20, 30, 40, 80, 90+ Watts, etc. Don't be fooled and do some research. "Import" watts tend not to be real watts!!!
Newly Designed Aluminum Heat Sink w/ Vortex Air Condenser & 15,000 RPM Turbo Fan Provides Exceptional Heat Dissipation and Air Assist. Constant Current Driver w/ PWM/TTL Control Signal Input - 5 Amp Output.
G-8 Lens w/ EZ Focus Adjustment (Other Lenses Available). Screw Terminal Block for Easy Connectivity. 8+ Watt Laser Engraving Module.Unique Rail Mounting System for Quick Height Adjust and Disconnect. Mean Well 12V / 5A Switching Power Supply w/ Power Cord. Inline On/Off Power Switch & 3-Pin JST Adapter. Always wear protective eye-wear that is rated to block the 450nm wavelength and NEVER look directly at the beam.
You only have one set of eyes! Basic electrical knowledge and skills are required for setup and operation of this device. This product may not be suitable for everyone. Reverse polarity, excessive current and high heat will damage or destroy electronics.
Never operate with the cooling fan disabled. Because the Z80_8W450B9 laser diode is a multi-mode diode you will always get a rectangular spot as opposed to a symmetrical dot. This is a characteristic of multi-mode laser diodes.
You want to focus it so you have the cleanest and thinnest line possible. Don't try to make it symmetrical or you will produce a larger and less powerful spot. Be aware that the closer you get it to the work the more likely you are to get smoke and/or soot on the lens.
It can be cleaned with a very soft lens cloth and some 91% rubbing alcohol. Modifications may need to be made to either the mounting rail or the mounting plate to adapt it to fit your CNC machine/3D printer. Modifications or moving limit switches may be required if laser module makes contact with parts of your CNC machine/3D printer.
Engraving/Cutting speed and accuracy may differ from machine to machine depending on its capabililtes and rigidity. The product design may change/evolve and item(s) received may differ from description and/or photos. This is a very powerful device and you must never shine it at another person, animal, aircraft or another persons property. This is NOT a toy! You are solely responsible for it's use. I just happen to have one of their CNC frames. Contact me with any questions you may have! It can be cleaned with a very soft. Aluminum, Copper, Plastic and Awesomeness. 12V / PWM / TTL.