Super high power: the world's first 20W optical power laser engraving machine. The latest four 6W laser coupling technology, with powerful power, can cut 12-15mm paulownia board, 8mm black acrylic board, and even 0.05mm stainless steel sheet at one time.The product is equipped with an air kit as standard: The cutting ability has been greatly improved, and the cutting accuracy and cutting quality can also be greatly optimized. Newly upgraded 32-bit motherboard: Built-in 256-bit color scale map, which makes the engraving work more delicate and has higher contrast, so that your engraving is not only black. Newly designed laser: Tired of fixed focu film? Think air assist is not aesthetically pleasing? Now, the new E20 laser has a built-in tool-free focusing module, and a built-in air assist system, without the interference of wires, simple and beautiful.
It is small in size and multifunctional, bringing a new control experience. Brand-new filter panoramic glass eye protection design: The panoramic filter glass protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you don't need to wear goggles, you can also watch Laser engraving.Reduce your goggle expense and inconvenience of wearing goggles. Sturdy and easy-to-install structural design: The all-aluminum anodized structural design makes the machine more durable and improves the engraving accuracy. The whole structure has been designed for quick installation, and the installation can be completed in generally 20-30 minutes. Upgraded version of high-performance fixed-focu laser: It can be engraved without focal length adjustment; the focal spot area of the new laser is only 13 times that of other common lasers, and it can take into account precision engraving and high-energy cutting at the same time. At the same time, the laser power of the fixed-focu laser is more stable than that of the zoom laser.
Wide compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP Win 7 Win 8 XP Win 10, and also supports LightBurn and the engraving file format supports NC, BMP, JPG, PNG, DXF, etc. Precise scale line axis: X-axis and Y-axis contain precise scale lines, which is convenient for you to quickly measure the length. The 400x400mm large-area engraving area can meet your various engraving needs. Upgraded compressed spot coupling technology: Ultra-fine laser focu area reduced to 0.08x0.1mm, high-density laser can easily cut 25mm thick wood, 30mm thick black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, engraving & cutting The speed is 40% higher than that of ordinary models, and it can match the effect of 300W CO2 laser engraving machine.Integral screw: The machine uses an integral screw instead of a combined shaft coupling. The stepping motor and the screw are integral, which makes the movement of the laser more precise and the coupling more durable. New laser with knob: It is more convenient and quick to adjust the height of the laser.
Support offline engraving: Configure the terminal control panel, support offline engraving, you can carry out engraving anytime and anywhere without being limited by the computer. Laser sintering temperature is up to 2400?
Emergency stop button: If there is an unexpected situation, stop the machine at any time, and the engraving is safer. Expandable engraving size: Modular design of the fuselage mechanism, only need to replace the frame components, you can get a super large engraving size of 400-850mm.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
Do not touch the laser with your hands, or you may burn your hands. Please avoid strong impact on the machine. Children under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision. Do not apply the laser directly to any specular reflective objects, which may cause injury to the operator or burn the laser. Package Included: 1 x Mounting screw 1 x Tool kit 4 x Foot pad foam 1 x Film 3 x Acrylic sheet 3 x Wood chips 10 x Wire tie 1 x Desiccant 1 x Brush 1 x Clean cloth 1 x Card reader 1 x TF card 1 x Power adapter 1 x Instruction 1 x Data line 1 x Touch screen components 1 x HDMI cable 1 x Laser module 1 x Cutting pad 1 x X axis assembly 1 x Y axis left profile 1 x Y axis right profile 1 x Profile on the base 1 x Under the base profile 3 x Foot bracket.
This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "powertool_online" and is located in this country: GB. This item can be shipped to United Kingdom.