SDKEHUI Co2 Laser Engraving Machine Cutting Engraving Laser 50W + Rotary Axis. 50W Co2 Laser Engraving Cutting Machine. A large, fully see-through acrylic sheet observation window. The whole work area and work process come into view.Large working area 300 x 500 mm with integrated fron. T and rear entrance and exit. The objects can fully penetrate the machine, so the extra long objects can be engraved/cut. A red light indicates that the machine is working and needs to pay attention to safety. A green light indicates that the machine is ready to work.
The power supply is equipped with an LCD display. The LCD display shows the current and automatically detects errors. If there are any problems, you can fix the errors following the instructions. Engraving Platforms: Honeycomb cutting platform suitable for various engraving and cutting object sizes.
With the latch, the laser turns off when the lid is opened. The laser continues the previous work after the lid is closed again and the "Enter" button is pressed. A red dot pointer indicates the precise position of the engraving.The point of origin of the laser can be clearly seen once the power supply is connected. Built-in air assist function and exhaust fan, no additional installation required, simplifies installation. They help clean the dirt, gases and heat in the work area, always making engraving and cutting efficient and precise. The water cut protection system protects the laser tube from being burned out. If the water cooling system fails suddenly, the temperature of the laser tube will rise. At this moment, the water protection system will immediately cut off the power supply to the laser tube to prevent the laser tube from being burned out. The speed, power and other settings can be adjusted from the control panel. The raster graphics/color vector mapping system allows you to adjust engraving speed and power through color coding. Supports network connection, USB port and USB flash drive.
Reinforced and more robust machine housing ensures safe transport and longer service life. The worktable can be moved up and down to fit a variety of engraving materials and products. Autofocus - can focus automatically without the need to manually measure the focal length. After 3-4 hours of work, there should be a break of about 30 minutes.Follow FDA standard, CE certification and. Suitable for carvings of different sizes. Ensure visibility and show engraving position. Easy to use, speed, power and other settings can be adjusted. Using 50W CO2 laser tube.
The carving will be smooth and precise. Allows changing engraving speed and power by color coding. Allows you to carve cylindrical objects such as cups, pots and musical instruments. Absolutely make the transportation safer and extend the service life. Support USB connection and U disk.USB connection, convenient for you to watch through computer. Water cooling and protection system. R the temperature of the laser tube and make it work longer. Air assist function and exhaust fan system.
Helps the cutting surface to always clean dirt, gas and heat, making engraving and cutting projects a breeze. Dive into Work with Confidence. The high-performance DC tube delivers 50W of power for up to 3,000 hours of usage and doubles its lifespan when consistently used at lower settings. The honeycomb cutting platform is suitable for various engraving and cutting object sizes. The honeycomb plate has the advantages of light weight, high strength, good rigidity, high flatness, not easy to damage and deform.The honeycomb plate overcomes the shortcomings of the original aluminium work table, which is easy to buckle and not resistant to high temperature and deformation. The widened viewing window is made from. To ensure lasting safe use, while the cover interlock automatically cuts the laser beam if the window is opened.
The device is equipped with CorelDraw, AutoCAD, Illustrator. AutoCAD and other advanced software DSP control system is compatible with.We have warehouses in UK and choose from the nearest warehouse to. F you do not like the goods and would like to return them to us, please see below. Before returning the goods to us, please tell us first.
Please return the goods to us within 7 days after you have received the goods. Please confirm the goods as original packing.Ut please do not forget to send us some clear photos. After you have ordered, you must pay within 7 days. We offer detailed product descriptions and images to give you a real advantage in finding the products you're looking for.