Improved Laser Engraving with Air Assist System: S30 series is equipped with a 32-bit Airassist motherboard and a control type air pump, which intelligently controls the Air Assist switch during engraving via the M8 button of LightBurn software can. This makes the engraving and cutting very clean and is very suitable for making exquisite gifts. Excellent engraving performance: The S30 5W laser is very cost-effective and can meet 90% of hobby needs; It can cut 5mm balsa wood and 3cm plywood at the same time.
And so that it achieves industrial-grade engraving accuracy with an extremely solid and high-precision X-axis with linear slide rail, no wave pattern when carving small objects. A 410400mm engraving area can meet your different engraving needs. Built-in high-pressure air-assist nozzle: The S30 series is equipped with an advanced high-pressure air-assist metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance.
The powerful airflow blows away the residue and makes the cutting surface very clean. Interchangeable protective lens: Adopts an innovative interchangeable lens, greatly improving the lifespan of the laser, which is more than ten times longer than other general lasers.
If the lens is damaged or after long-term use, the lens can be replaced to restore cutting performance. Eye protection and safety design: equipped with a removable eye protection that does not dazzle even without glasses. If you don't need it, you can simply disassemble it. The presented A4 size steel pad can well protect the table from laser damage. There is a very safe and eye-catching power switch on the machine, which allows you to turn off the power directly and quickly in an emergency. Sturdy and Durable Frame: The S30 series is made of high-strength aluminum alloy, its frame can support up to 50kg weight without damage and is very durable. The frame can be used for a long time and maintains high precision. You just need to upgrade the latest laser when the machine needs to be upgraded.And there are precise scale lines on the X and Y axes, allowing you to quickly measure the size of the engraved object. Specification: Model: SCULPFUN S30 Power input: 100-240V AC, 50/60Hz Output: 12V 5A Engraving accuracy: 0.005mm Engraving area size: 410400mm Machine power: approx.
Diode laser output power: 5W (note that this is light energy, not electrical energy) Laser focus: 0.06 x 0.06mm Laser wavelength 455±5nm Focusing method: fixed focus column + sliding device Laser protective cover: Equipped with a removable laser protective cover to protect the eyes. You can adjust it up and down or take off the glasses. Air pump: Type: mainboard controlled air pump, voltage 12V, flow 30L/min Inner diameter of air hose: 7.5 mm.
Engraving material: all types of wood (including walnut, cherry and other high density woods), MDF, zigzag, cardboard, plastic, leather, circuit board, aluminum oxide, 304 stainless steel, ceramic, dark stone Cutting material: all types of wood (including walnut, cherry and other high density woods), MDF, acrylic boards, cardboard, non-woven, bamboo, leather, some plastic boards, circuit boards Operating software: LightBurn (with air support function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data transfer method: USB connection or wireless BT connection.
Packaging size: 62.3 x 24 x 22.5 cm/24.5 x 9.4 x 8.8 inches Package weight: 6.7 kg. Due to the strong laser power, it is forbidden to operate the engraving machine unattended.
Stop it when you're not there. For detailed machine instructions, please refer to the parameter settings manual. When operating the laser engraving machine, please install the laser protection cover; If it is not installed, you must wear safety glasses.Do not touch the laser with your hands, otherwise you may burn your hands. Please avoid strong impact on the machine. Children under 14 years old are prohibited from using this product, and children over 14 years old must be supervised by adults.
Do not place the laser directly on reflective objects that may injure the operator or burn the laser. Packing list: 1 x S30 Laser 1 x Laser Repair Kit 1 x 12V automatic air pump 3 x DIN A4 3mm wooden board 2 x limit switches 1 x 12V 5A power supply 1 x Power Cord 1 x USB Cable 1 x Air Hose 1 x Installation Tool Kit 1 x Laser Glasses 1 x A4 Metal Backing Board. Step 1-6 Install the package 1x user manual 1 x X-Axis Mount 2 x X-profiles 2 x Y profiles 1 x Control Box Assembly 3 x Support Feet. Re-assembled for Plug&Play: The machine is 100% installed in the package, equipped with an adapter cable, and only needs to be connected to the Y-axis wiring of the laser engraving machine to engrave Cylindrical objects, such as pens, water bottle, etc. Large Engraving Space & 4 Raising Feet: SCULPFUN roller base design is lower and stable, and equipped with 4 sturdy metal raising feet, so that it has a larger engraving diameter of 6-150mm, which can meet more engravings need.
Metal feet are more solid than plastic feet, and the machine is more stable when engraving. Sliding Space Adjustment: Adjusts the size of the space between the 2 rubber rollers by sliding, and fixes the roller by hand screw, which is simpler and faster than the traditional multi-stage fixing hole adjustment. 100% Scale High-precision Engraving: Our roller adopts high friction 70A rubber shaft to prevent slipping, and the linear speed of the rotating surface has been precisely calculated. Directly plug in the engraving machine cable to engrave the image in 100% scale. Does not enlarge or reduce the image.Wide Compatibility: The roller is suitable for multiple engraving software such as lightburn or laserGRBL, and it can be used directly, no need to set parameters in software. In addition, it can be applied to 95% of the engraving machines on the market such as SCULPFUN, NEJE, Ortur, ATOMSTACK, etc. Specification: Model: SCULPFUN Rotary Roller Product Size: 27x22x5cm Packaging Size: 34259cm/13.39.83.5in Packaging Weight: 1.5KG/52.9oz Packing List: 1× Roller Device 1× A Type Wiring 1× B Type Wiring 4× Raise Feet 1× Screw Bag 1× Soft Ruler 1× User Manual.