SCULPFUN S10 Laser Engraver 10W Laser Cutting Machine with Air Assist Nozzle

  
SCULPFUN S10 Laser Engraver 10W Laser Cutting Machine with Air Assist Nozzle. Item model number: SCULPFUN S10. Diode laser output power: 10W (note that this is light energy not electrical energy). Inner diameter of air auxiliary hose: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, recommended outlet diameter of 8mm). Focusing method: fixed focus column + sliding device.

Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles. Machine power consumption: about 36W (not related to engraving or cutting performance, just power consumption). SCULPFUN S10 Laser Cutter and Engraver Machine. Powerful high-speed air assist: S10 is equipped with high-speed air assist nozzles.

What makes this nozzle different is that it has an advanced hydrodynamic design that makes better use of air pressure. When using the same compressor, the S10 has a faster jet of air. For example, when using a 30L/min, 0.03Mpa air compressor, the S10 nozzle will eject a high-speed airflow of up to 14.5m/s. This will greatly improve cutting penetration and cutting efficiency. Ultra-fine and high-density 10W laser shaping technology: The laser power of S10 is increased to 10W, which is twice that of S9. But get the same 0.08mm focus ultra-fine laser beam as S9, which means S10 has higher energy density, stronger cutting penetration and engraving ability. SCULPFUN S10 Laser Engraver for Wood and Metal. Faster, stronger and cleaner: Combining advanced high-speed air assist and 10W high-energy density laser, the S10 reflects industrial-grade wood cutting performance: first, the cutting efficiency is greatly improved, and the cutting is faster; the second is The cutting penetration is stronger, and many high-density woods can be cut. The third is that the cutting surface is cleaner, and the strong airflow blows away the residue, so that the surface of the cutting object is free of any stains. Detachable laser eye shield: S10 is equipped with a detachable eye shield, which will not dazzle even without glasses. Also if you don't need it, you can easily disassemble it.

Industrial grade cutting accuracy: S10 adopts extremely strong high-precision linear slide rail X-axis, making it reach industrial grade engraving accuracy. When comparing small engraving details, the S10 does not have the wavy pattern that ordinary engraving machines appear. 0.08mm ultra-fine laser spot, fast and precise cutting and engraving. More advanced and upgradeable 32-bit motherboard: S10 motherboard adopts 32-bit chip, which has faster operation speed, and also retains Z-axis and limit switch functions, which is convenient for people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL.

Engraving material: all kinds of wood (including walnut, cherry and other high density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, alumina, 304 stainless steel, ceramic, dark stone. Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards. Because of the powerful laser power of S10, it is forbidden to run the engraving machine without supervision. Pause it if you're not around. For detailed machine instructions, please refer to the manual for parameter settings.

When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. Do not touch the laser with your hands, otherwise you may burn your hands.

Please avoid strong impact on the machine. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. SCULPFUN Laser Engraver and Cutter Machine. Operating software: LaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system.

Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data transfer method: USB connection. Power Input: 100-240V AC, 50/60HZ Output: 12V 5A. Equipment net weight: 3.42kg. SCULPFUN S10 engraving machine packing list.

1 x A4 metal backing plate. Step 1-6 Install the package.

Immediately you paid for the order. Communication always is best way to solve problem. We accept any return in 30 days that we promise. Please never return the parcel without agreement. From us, it is no possible for us to get the parcel.

We at strive to give all of our customers a 5 star service. As this helps us maintain a quality service. Communication is very important, we believe we can resolve all the problem with you. It's our pleasure to answer any questions you have.