Power Supply 80W CO2 220V Laser For Engraver Engraving Cutting Cutter ir

  

Power Supply Engraving Cutter Laser Cutting Engraver For 80W CO2 220V. High response speed, Dramatically lengthen the life of laser.

Easy control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. Easy control of laser power: Both 0 - 5V analog signal and PWM signal can control the laser power.

The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. Application: Acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut; etc.

23 mA (up to the laser tube). 130% of the Maximum current. High level control voltage range.

Low level control voltage range. Amplitude:0.5 mm Frequency:1055Hz 2 hours. Mean Time between Failure (MTBF). Carrying 60°C high temperature testing time. Carrying 60°C high temperature testing time: 12 hours.

7 seconds open stop test times. We also have AC110V/60Hz, DC300V, DC150V of this item, please contact with us if you need. Wed, 22 Mar 2023 12:09:48 GMT 638151125888727563 D8C7034A4D570369. We stand behind every product we sell. However, we will try our best to minimize it.

Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich. You can enjoy top-quality product and high-quality services from us.