Immediately got hooked when I made my first sale, using the profits to upgrade the machine as much as possible. Apart from a rotary device, this machine comes with all possible upgrades, these are listed below.Drag chain and track on both x and y axis. Laser module height adjust from Expocnc on Demand.
G8 lens and air assist (in red) from Expocnc on Demand (barely used as I never had time to set it up properly). Air assist pump (this does not come with the air assist tubing that fits between the pump and laser head, it's cheap enough from B&Q). Enclosed box with hinged lid. I made the box with a raised platform with the intension of installing a rotary device in the void, this hasn't been cut in however the option is there.I will leave the ceramic times on the base, this reduces the fire risk from a stuck laser (hasn't happened to me but have seen some horror stories). In all cases NEVER LEAVE THE LASER UNATTENDED WHEN OPERATING. The only thing I'd recommend is replacing the wiring loom from pin to pin, the original wiring had to be extended to fir the drag chain, this is normal for this type of upgrade. I will also be supplying the materials setting library I created with this machine for use in lightburn it will save you time trying to find the right settings for this machine.
Due to the size of everything, this item is collection only from Stoke on Trent. The item "Ortur Laser Master 2 Engraving Cutting Machine 20W, Large Work Area, full set up" is in sale since Monday, August 9, 2021. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Other Power Tools". The seller is "natnsm-ayqp9bkhc" and is located in Stoke-on-Trent. This item can't be shipped, the buyer must pick up the item.