3 stage filters ensure its good filtering performance, and provide you healthier life. Premium pure copper motor with strong suction can quickly suck harmful gases. The control knob allows you to control the airflow according to your need. The compact size and practical handle allow you to take it around. With it, your work environment will be far away from misty.Number of Filter Layers: 3. Motor Type: Pure Copper Brushless Motor. Effective Absorption Distance: About 15cm/5.91in. Air Inlet Interface Diameter: 50mm/1.97in. Filtering Effect: 0.3µm 99.97%.
Extraction Tube Length: 1.4m/4.59ft. Power Cord Length: 1.5m/4.92ft. Overall Fume Extractor Size: 282534cm/11.029.8413.39in. Packge Size: 3631.530cm/14.1712.411.81in. Gross Weight: 10.5kg/23.15 1bs.Net Weight: 10kg/22.05 1bs. Safety Guard: The heat-sink holes that can effectively avoid excessive heat, blockage alarm reminder, leakage protection, and built-in safety fuse ensure safe use, thereby extending the service life of the machine.
3 Stage Filter: Our fume extractor has a cotton outer filter, central HEPA filter, and inner activated carbon filter, which continuously intercepts large particles, pulls in fumes/debris, and absorb your work's harmful gases and unpleasant odors, having a great filtering effect(0.3µm, 99.97%) and keeping your eyes and lungs from pollution. Adjustable Design: You can easily adjust this extractor's airflow to match your needs by rotating the control knob, which is very convenient and practical. High Efficiency: Adopting a 150W pure copper brushless motor and a high-performance smoking hood, this machine has 5000±10%rpm speed, 9111.2ft³/h strong suction, and a large smoking area, which can easily absorb most small objects within a linear distance of 5.9, including smoke, exhaust gas, powder, iron filings, etc. Low Noise: It works at a suitable noise.Compact and Portable: Its compact size(11.029.8413.39 inches) only takes up a little space, making it suitable for small workbenches, and home DIY, and can be stuffed under the table while avoiding clutter in your work environment and hindering your work. The recessed handles at two sides ensure convenient holding/carrying of this machine. E xtraction Tube: The 4.59ft extraction tube is 360° adjustable to adapt to various scenarios and has a great sealing effect. Non-slip Feet: The four non-slip feet ensure higher stability, avoid scratching the floor, and raise the bottom for better ventilation. Metal Latches: The metal latches at both sides fully seal the fume extractor during operation to avoid leakage and allow you to simply open the lock to replace the filter.
It is suitable for manual soldering, moxibustion beauty, laser marking, soldering assembly line, soldering furnaces, soldering robots, chemical experiments, cosmetic medicine, laser cutting, DIY process, maintenance of electronic products, etc. Layer 1: PP Cotton Filter.
Filter Range: PM50 and large airborne particles such as wood chips and iron filings. Replacement Cycle: 7-15 DaysIt depends on the usage environment. Layer 2: HEPA H11 Filter. Filter Range: Mainly filters tiny particles, such as PM0.5, air 0.25-0.5µm, and iron. Replacement Cycle: 1-3 MonthsIt depends on the usage environment.
Layer 3: Activated Carbon Filter. Filter Range: Invisible harmful gases and powder below 0.3µm, such as Benzene and formaldehyde. Replacement Cycle: 3-6 MonthsIt depends on the usage environment.
Turn on the power button and rotate the control knob to make the machine work according to the required air volume. Rotate the control knob to "OFF", and the machine will stop working. Rotate the control knob to "ON", and the machine will start working. Rotate the control knob to "MAX", and the machine will use the maximum value. Simple Replacement of the Filter.
Open the metal latch on the host. The effective absorption distance is less than about 5.91 inches, to ensure that the smoke can be completely absorbed.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering. Feedback is very important to us.It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.