High Engraving Performance: 10W optical power output, the minimum focal length of this module is up to 0.04mm, the engraving speed is up to 20000mm per minute, and the maximum cutting thickness is up to 20mm. Adjustment Focal Length: The focal length of this module is adjustment, when adjusted to about 33mm, a focal length of 0.04mm can be obtained, suitable for engraving stainless steel or black aluminum oxide, etc. When adjusted at 55mm, the material can be cut up to 20mm. Good Heat Dissipation: This engraver module is intelligent controlled by temperature sensor, with 10000 RPM 40mm cooling fan, has good heat dissipation. Suitable Materials: The module can directly engrave ceramic, MDF, coated glass, black acrylic, plywood, brushed stainless steel, stone, bamboo, leather, rubber, alumina and other materials, reflective materials need to be painted with black paint on the surfaces when engraving.
Wide Compatibility: Compatible with most laser engraving machines, 3D printers and CNC milling machines on the market, has perfect compatibility, and also compatible with mature engraving software for LaserGRBL, for Lightburn etc. Item Type: Laser Engraving Module Heat Sink Material: Aluminum Alloy and Brass Shell Model: A40640 Luminous Colour: Blue Section Size: Approx. 40x40mm/1.6x1.6in Cooling Method: Temperature Sensor Intelligent Control, 10000 RPM 40mm cooling fan Product Size: Approx. 85x50x40mm/3.3x2.0x1.6in Engravable Material: MDF, Balsa, Paper, Wood, Fabric, Plastic, Leather, Plywood, Foam, Anodized Aluminum Technical Parameter: Optical Power Output: 10W Wavelength: 445-450nm Beam Shape: Dot (Focusable) Working Voltage: DC 12V TTL and PWM Modulation: Support, compatible with TTL and PWM modulation Input Voltage: DC12V 3-4A PWM TTL Input: DC3.3-12V Input Interface: PH2.0, 4Pin (+, -, PWM TTL, Temperature), 3Pin (+, -, PWM TTL), 2Pin and 2Pin (+, -) and (PWM TTL, -) Note: The temperature interface can be disconnected Drive Mode: External ACC Safe Temperature Range. 1 x Laser Engraving Module.1 x Air Assist Kit. 1 x Digital PWM Wave Pulse Signal Generator Adjustment Board. 1 x Interface Adapter Board. Please wear laser goggles during use to avoid direct contact with the eyes and skin. Do not engrave mirror objects, pay attention to fire prevention, and pay attention to pets when working. Smoke will be produced when burning, please pay attention to indoor smoke exhaust. If you have any quality problems (except for individual cases, such as using the laser module for more than 30 minutes each time and causing damage), please feel free to ask our customer service for help. If there is any problem with your laser module, please do not disassemble it without our permission.
It will destroy the laser module. Many operational issues can be resolved based on your video and problem description. This laser module is compatible for NEJE Master 2 machines. It can also be compatible with other CNC equipment, such as 3D printers, CNC milling machines, etc. But requires a certain knowledge of PWM waveform control.
Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls.Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "bigoodspeedshop" and is located in this country: CN. This item can be shipped worldwide.