NEJE 3 Plus N40630 Laser Engraver CNC Router Engraving Cutting Machine 255x420mm

  

Description:N40630 have strong comprehensive capabilities, the optical power is 5.5-7.5W output, and the focus is square light spot, good at carving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc. It is a single beam module with comprehensive functions and high cost performance. It is the best choice for beginners.

The difference between them is that the N40630 can be installed with a metal air nozzle, but the air pump must be free of oil and water to ensure that the lens is not damaged. Designed for laserGRBL, lightburn, laser engravers, 3D printers, CNC mills, for Arduino projects. 5.5W optical power output, 4mm plywood from 1 pass (speed 100). NEJE 3 Plus N40630 Laser Engraver CNC Router Engraving Cutting Machine 255x420mm. N40630 have strong comprehensive capabilities, the optical power is 5.5-7.5W output, and the focus is square light spot, good at carving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc. Safer, built-in protective glass to protect eyes! Operation is more comfortable even without protective goggles. Quieter, smart drive adjusts cooling fan speed based on laser temperature. NEJE laser module uses a convenient digital PWM wave pulse signal generator adjustable frequency duty cycle board. A sliding mounting clamp is provided for easy focus adjustment. Heat sink material: Aircraft aluminum + brass shell. Section size: 40mm x 40mm. Cooling method: Temperature sensor intelligent control + 10000 rpm 40mm cooling fan. Adapter: 5.5 2.1 port. Can not engrave: Metal/Glass/Stone/Ceramic/PCB/Stainless Steel/Reflective Material/Transparent Material. Optical power output: 5.5W. TTL&PWM modulation: support, compatible with TTL&PWM modulation.

Input interface: PH2.0-4Pin (+, -, PWM/TTL, Temperature), 3Pin (+, -, PWM/TTL), 2Pin+2Pin (+, -) + (PWM/TTL, -). Note: The temperature interface can be disconnected, NEJE provides a text description of temperature acquisition on the wiki. Module weight: 202g (the lighter the weight, the smaller the moving inertia and the better the performance). Service life: 10000-20,000 hours.

Output: PH2.0 4pin (12V, GND, PWM/TTL, Temperature). Modes: 3 modes (off, manual PWM, PWM/TTL in).

Frame size (L - W -H): 550x480x140mm. Working area(X - Y): 255x420mm. Dot Pitch: 0.075mm, 338dpi.

Pixel: 2400 x 5600 px. Max Move Speed: X: 1500mm/s(with N40630 module 204g), Y: 1000mm/s. Frame Material: High precision PC material hybrid frame. Structure Feature: Fit, High precision, stabilize, smooth, no oil, easy maintenance, long life.

Motor Size: 42 x 42 x 50mm. Motor Drive Current: 0.9A. Compatible Modules: All NEJE 4pin 12V Laser Module (Recommend: A40640, N40630, A40630, E40, N308220, N30610, B30635).

MCU: 32-bit 200Mhz MCU (Top 32-bit MCU). M7 Control: Yes (For building automatic smoke extraction systems). M8 Control: Yes (For building automatic air assist systems). Door Control: Yes (Emergency Suspension and Safety Door Control). Input: DC 5.5 2.1, 12V 4A or 5A (Power Adapter). System: Win 7 / Win 8/ Win 10, Android, iOS, iPadOS, macOS, HarmonyOS. File format supports: SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. NEJE Win Software: Yes, It is recommended to open the NEJE software to update to the latest firmware for the first time use. Lightburn and LaserGRBL: Yes, improved low light function, added M8, M7, emergency stop extended automatic control, optimized GRBL interaction.

Repeat Engraving: Yes, After the engraving or cutting is completed, the device will not lose the location information, if you are not satisfied with the work, you can continue to work. NEJE Cloud Gallery Service: Yes. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Please allow 1-3mm measuring deviation due to manual measurement.

Thank you for your understanding! Laser engraving machine x 1. 12V 4A power supply (12V 5A with N40630) x 1. 5.5 2.1 port.

Support, compatible with TTL&PWM modulation. PH2.0 4pin (12V, GND, PWM/TTL, Temperature).

3 modes (off, manual PWM, PWM/TTL in). Frame size (L - W -H).

Working area(X - Y). X: 1500mm/s(with N40630 module 204g), Y: 1000mm/s. High precision PC material hybrid frame.

42 x 42 x 50mm. We are unable to make amendments to address details for your own privacy once the order has been placed. However, if you have any issues regarding your order, we have a dedicated customer service centre who will be delighted to help and resolve any issues that may arise. We will do our best to resolve this for you. We aim to respond within 24 hours.

Portable Toilet Tent Changing Room Outdoor Instant Pop Up Privacy Camping Shower. 2Pcs Rubber Non-Slip Replacement Part Step Ladder Feet Foot Mat Cushion Black GW. Beige Bedside Table Cabinet Nightstand w/3 Drawers Storage Bedroom Furniture. 4 Tier Wooden Shoe Cabinet Footwear Stand Rack Storage Cupboard Unit Hallway UK. Electric Aquarium Gravel Sand Fish Tank Change Filter Pump Vacuum Cleaner Water.

5 Pcs Analog Stick 3D Joystick Replacement for Xbox 360 Wireless Controller. XL6009E1 DC-DC Adjustable Step-up Power Boost Voltage Converter Module. Ruby and Sapphire Dual Needle Stereo Stylus Turntable Cartridge Accessory. Auto Car Dashboard Desk Digital Clock Time Date LCD Screen Self-Adhesive Bracket. Valve Core Remover Dual Size R22(1/4") R410(5/16") Port Installer Tool. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "hughuiy" and is located in this country: GB.

This item can be shipped to United Kingdom.

1. Laser module model: N40630
2. Heat sink material: Aircraft aluminum, brass shell
3. Luminous color: Blue
4. Section size: 40mm x 40mm
5. Cooling method: Temperature sensor intelligent control, 10000 rpm 40mm cooling fan
6. Size: 60*40*40mm
7. Adapter: 5.5 2.1 port
8. Module input: 20-30W
9. Optical power output: 5.5W
10. Wavelength: 445-450nm
11. Beam shape: Dot (Focusable)
12. Working voltage: DC 12V
13. TTL&PWM modulation: support, compatible with TTL&PWM modulation
14. Input voltage: DC12V 3A
15. PWM/TTL input: DC3.3V-12V
16. Drive mode: External ACC
17. Safe temperature range: <60℃
18. Module weight: 202g
19. Service life: 10000-20,000 hours
20. Power input: DC 12V
21. Output: PH2.0 4pin (12V, GND, PWM/TTL, Temperature)
22. Modes: 3 modes (off, manual PWM, PWM/TTL in)
23. Temperature display: YES
24. PWM display: YES
25. Manual PWM control: YES
26. Frame size (L - W -H): 550x480x140mm
27. Working area( X - Y): 255x420mm
28. Dot Pitch: 0.075mm, 338dpi
29. Pixel: 2400 x 5600 px
30. Drive accuracy: 0.01mm
31. Max Move Speed: X: 1500mm/s(with N40630 module 204g), Y: 1000mm/s
32. Frame Material: High precision PC material hybrid frame
33. Vertical Carving: Yes (45°)
34. Motor Size: 42 x 42 x 50mm
35. Modified Item: No
36. Country/Region of Manufacture: Unknown
37. Brand: NEJE
38. Type: Laser Engraving Machine
39. Personalise: No
40. Custom Bundle: No