Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch.The whole machine function test requires only 4 screws to complete the installation. Through optical processing, the A40630 module has a small and large divergence angle, can directly engrave stainless steel, and the maximum cutting thickness reaches 18mm.
Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.
Wood, MDF, leather, paper, cotton, etc. The cutting edges are very clean. Cover spraying can engrave stainless steel, glass, transparent acrylic and so on. It has factory preadjusted focus on lens under air assist unit of 10mm from engraving surface for best results. It is not recommended to remove air assist unit because of very tight fit, do it at your own risk.
Comes with 10mm focus distance set tool and all original accessories. Supports aftermarket Pro Software , such as Lightburn.