K30 30W+ Optical Power Laser Module. Laser Tree K30 is a real 30W+ output laser module designed for powerful cutting. If you need to cut a lot of thick materials and speed up production, the powerful Laser Tree K30 is a good choice. K30 is a high power 30W+ (33W-35W) optical power laser module, built-in 6pcs 5.5W beam compressed laser diodes. Cut 15mm bass plywood: 180mm/min, 100% power, by one pass.Cut 15mm black acrylic: 35mm/min, 100% power, by one pass. Cut 30mm pine wood: 120mm/min, 100% power, by one pass. Cut 9mm MDF: 300mm/min, 100% power, by 2 passes. 3 times engraving speed compare with 10W laser power module. Built-in Air Assist & Dual-Fans Cooling Systerm.
Built-in air assist to get clean-cut edges, improve cutting performance. Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life. Temperature Display & Alarm Function. Use in high working temperature will affect the life of the laser module. K30 with temperature display function can easily check the internal temperature of the module.
The buzzer will sound an alarm when the temperature of the laser head is higher than 55? It helps laser engraving or cutting precise positioning. The adapter board is used for electrical compatibility, suitable for Zaitu, Otur, Tw Trees, Sulpful9, Xtool, Aomstack and other models of DIY laser engraving machines. The sliding plate has multiple holes for installation compatibility. K30 is a high power.Optical power laser module, built-in 6pcs 5.5W beam compressed laser diodes. Built-in air assist to get clean-cut edges, improve cutting performance b. Use in high working temperature will affect the output power stability and life time of the laser module. Help you to place the material to the position correctly.
Easy to Set Focus & Fireproof and Anti-blue Light Design. 40mm fixed focus laser module, with fixed focus lever, focusing is more convenient b. Glass eye protection window, It can effectively prevent blue light and fire resistance. Please make the focus locate on the engraving material surface.For example, if you want to perform engraving, just make the focus on the engraving material surface and adjust the fixed focus lever to 0mm. Please make the focus locate lower than the cutting material surface. For example, if you want to cut 10mm material, the focus should be 4mm lower than material surface, please adjust the fixed focus lever to 4mm. Copper core protection lens, easy to clean and replace when the lens is contaminated or dusty. Reset Button: When the buzzer sound an alarm, close by reset button. 0 off and 3-12V on. When the laser module is not used for a long time, please ensure that the lens is not polluted by dust. When you replace the air nozzle, please ensure that your operation will not pollut the lens. Finger prints or dust on the lens will weaken the output power of the laser module, or even damage the lens. When you find the cutting ability decreases, the lens might be not clean. Please use a clean alcohol swab to clean it. High Power 20W Optical Power Laser Head. Enjoy the Fun of DIY. 4-Beam compression technology, real 20W optical power laser module.
Cut 10mm bass plywood: 3mm/s, 100% power, by one pass. Cut 8mm black acrylic: 3mm/s, 100% power, by one pass. Cut 5mm MDF: 3mm/s, 100% power, by one pass. With professional air assist to get clean-cut edges, improve cutting performance. Excellent heat dissipation design, keep stable cutting ability and extend service life.
Only 300400mw power decrease with 100% power output in 30mins. New eye protective cover design, can effectively filter blue light. Upgrade 40mm fixed focus, cutting ability is stronger.
Support digital(TTL/PWM)and analog modulation. Compatible with Zaitu, Otur, Tw Trees, Sulpful9, Xtool, Aomstack and other models of DIY laser engraving machines. Built-in 4pcs 5W beam compressed laser diodes, 20W optical power laser module. With air assist to get clean-cut edges, and improve cutting performance.
Please ensure that the air pump is turned on before you start cutting. If not, the smoke will contaminate the lens. For cutting work: the ideal position of the focal point is in the middle of the material, the cutting focal point of LT-4LDS-V2 is 40mm, the length of the air nozzle is 32mm, so the focal point position is 8mm below the air nozzle.
For example, if you want to cut 10mm plywood, the distance from the air nozzle to the surface of the material should be 8mm-10mm/2=3mm. (4mm is given in the illustration as the spacers we supply are not available in 3mm). High Precision Engraved Resolution 0.08mm.Use innovative compression technology to make the spot smaller and powerful. With a laser protective cover, it can effectively filter blue light when engraving or cutting. Stable optical output power to keep stable cutting ability. Effectively cool down to extend service life. High Stable 2EDG3.81 Connector.
Up to 7A Operating Current. Support Digital(TTL/PWM) and Analog Modulation. With driver adapter and power adapter, compatible with various 12V or 24V DIY cutting engraving machines.
This item is in the category "Business, Office & Industrial\Healthcare, Lab & Dental\Medical/Lab Equipment Attachments & Accessories\Lamps, Bulbs & Laser Components\Laser Modules & Heads". The seller is "laser-7066" and is located in this country: CN. This item can be shipped worldwide.