LASER TREE K30 30W Optical Power Laser Module with Air Assist 6 Diode Laser Heads for CNC Engraver Machine DIY Cutting Wood Tools. LaserTree K30 is a true 30W+ output optical power laser engraving and cutting module. It uses beam compression technology to combine six 5.5W laser diodes into a powerful laser beam with 30W+laser power. 15mm basswood plywood: 180mm/min, one pass.
15mm black acrylic: 35mm/min, one pass. 20mm pine wood: 120mm/min, one pass. 9mm MDF: 300mm/min, 2 passes.Built-in Air Assist & Dual Fan Cooling Design. 1>Built-in air assist to get clean-cut edges, improve cutting performance. 2>Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life. Temperature Display & Alarm Function. Excessive working temperatures can reduce the life time of the laser head at an accelerated rate.
LaserTree K30 create a solution with working temperature display, so that you can check the internal temperature of the module easily. When the working temperature of laser module over 55? It will sound an alarm through the buzzer. The working frame can be positioned by red crosshair, it is helpful for improving the convenience of the secondary cutting and engraving as well. 3 times engraving speed compare with 10W laser power module.Easy to clean and replace when the lens is contaminated or dusty. Anti-blue light view window with optical glass material, protective your eye from blue light, no fear of fiames. In order to improve the compatibility to different laser engraver machine, K30 provide a solution by adapter board for electric compatibiliy, and sliding plate with multi holes for installation compatibility. LT-K30 laser module can be installed on Zaitu, Otur, Tw Trees, Sulpful9, Xtool, Aomstack and other models of DIY laser engraving machines. With Air Assist VS No Air Assist. 1>The buzzer will sound an alarm when the operating temperature of the laser head is higher than 55°C.
2>Use in high temperature environments can affect the long term life of the laser head. We suggest the working temperature of the laser module is controlled below 55°C and the working environmental temperature below 35°C to get good power stability and durability.2>Easy to clean and replace when the lens is contaminated or dusty. Equipped with fixed focus lever, easy to set the focus. Focus bar design makes it easy to set the focus of the module. Reset Button: When the buzzer sound an alarm, close by reset button.
0 off and 3-12V on. The electrical connection status can be easily checked by the "Power" and "Signal" LED indicator. When the laser module is not used for a long time, please ensure that the lens is not polluted by dust. When you replace the air nozzle, please ensure that your operation will not pollut the lens. Finger prints or dust on the lens will weaken the output power of the laser module, or even damage the lens.
When you find the cutting ability decreases, the lens might be not clean. Please use a clean alcohol swab to clean it according to the following figure. If you need to order more, you can send us a message.