CNC 4540 Laser Engraver Wood Cutting Desktop DIY Laser Engraving Machine 4540cm

80W/40W Laser Cutting Machine GRBL 32Bit Control, 4540 Laser Engraving Machine. Motherboard: 32 bits motherboard with 32 Bits MCU. Power Supply: 12V 5A 60W. Electrical Power of Laser Module: 40W/80W.

Input Format: NC, BMP, JPG, PNG, DXF, etc. Carving Area: X: 450MM x Y: 400MM. Carving Speed: 3000MM / Min and less. Image size: No Limit (The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81um pixel precision).

It could preprocess 32 instructions, support baud rate as high as. The Most Advanced 32Bits Laser Engraver Firmware. GRBL 1.1F laser master firmware, smarter, faster, higher precision and easier to use. Laser power range could be S0 - S1000, Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper, that the 8bits high power laser engravers could not do.

Engraving speed could be as high as 3000MM/Min. (If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S). An alarm device is installed on the control panel. If the machine detects unauthorized movement, the laser is turned off and the machine alarms.

When the USB is disconnected, the laser turns off; the laser exceeds 1% of the power, and when it is not in use, it will be on for five seconds and the laser will automatically turn off, to prevent fire. LaserGRBL (free software) supports Windows XP, 7, 8, 10.

LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. And then connect to the engraver via laser LaserGRBL for engraving and cutting. It's the most popular paid carving software in the world, very easy to use. 450 x 400mm large engraving area.

Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance. Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving. The designed lifting module is easy to install, disassemble and replace the laser, and the up and down movement stroke is larger than before.

The braided wire is more beautiful, solid and reliable, so as to prevent fire during engraving. Comes with limit function, no trouble to use. Built-in positioning function, can quickly return to the mechanical origin. Support offline, if both offline and USB cable are connected at the same time, the computer will automatically recognize the USB cable.

Due to the different size of the laser, the actual engraving area of the machine is different. Width 33mm laser, actual engraving area: 450400mm.

Width 40mm laser, actual engraving area: 450380mm. Width 60mm Laser: Actual engraving area: 450370mm. The gantry structure does not need to be assembled. The others are all parts and need to be assembled by yourself. We provide instructions and video tutorials.

Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.

Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

This product is not recommended for industrial cutting due to its high engraving speed. Optical Power Output:5.5w.

Laser Tube: LD FAC C-Lens. Beam Shape:Dot (Fixed Focus). Module Size:40mm X 40mm X 152mm.

Cooling Mode:12v 10000 Rpm 40mm Cooling Fan. Input Interface:xh2.54-3pin (+, -, Pwm/ttl).

TTL Output Power:> 1k Hz Output Power = Continuous Power X 40%. Heatsink Material:Aluminum + PCTG. Anti-static: Up To 25kv Static Electricity Can Be Eliminated.

Shell: Frosted Material, Good Heat Dissipation. Magnetic Blower Protective Shell:constitutes An Air Duct, Has Good Heat Dissipation, And Protects Eyes And Lasers. Optical power output:9.5W11W. Beam shape:Dot (Fixed Focus).

Input interface:XH2.54-3Pin (+, -, PWM/TTL). TTL output power:> 1K HZ output power = continuous power x 40%. Anti-static: Up to 25kV static electricity can be eliminated. Shell: Frosted material, good heat dissipation.

Magnetic blower protective shell:Constitutes an air duct, has good heat dissipation, and protects eyes and lasers. Engraving Parameters Of Different Materials (For Reference Only). Plywood 2mm cut : 500mm/min, S1000, 1 Pass. Plywood 3mm cut : 450mm/min, S1000, 1 Pass. Plywood 4mm cut : 400mm/min, S1000, 1 Pass. Plywood 5mm cut : 240mm/min, S1000, 1 Pass. MDF board 3mm cut : 180mm/min, S1000, 1 Pass.

MDF board 3mm cut : 120mm/min, S1000, 2 Pass. Black acrylic plate 3mm : 120mm/min, S1000, 1Pass. Black acrylic plate 5mm : 120mm/min, S1000, 2Pass.

Plywood 2mm cut : 300mm/min, S1000, 1 Pass. Plywood 3mm cut : 250mm/min, S1000, 1 Pass. Plywood 4mm cut : 200mm/min, S1000, 1 Pass. Plywood 5mm cut : 100mm/min, S1000, 1 Pass. Plywood 5mm cut : 200mm/min, S1000, 2 Pass. MDF board 3mm cut : 100mm/min, S1000, 1 Pass. MDF board 3mm cut : 320mm/min, S1000, 2 Pass.

Black acrylic plate 3mm : 100mm/min, S1000, 1Pass. Black acrylic plate 5mm : 100mm/min, S1000, 3Pass. Magnetic Design, Easy To Disassemble. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "cronostools" and is located in this country: CN.

This item can be shipped worldwide.

Plug Type: China
color: 80W
USB Interface: Type C
Material: Aluminium
Brand: Unbranded
Electrical Power of Laser Module: 40W/80W
Wavelength: 450nm
Type: 80W/40W Laser Cutting Machine
Carving Area: X: 450MM x Y: 400MM
Motherboard: 32 bits motherboard with 32 Bits MCU
Firmware: GRBL1.1F Firmware
Power Supply: 12V 5A 60W
Lettering Type: Removable