You can transfer the file to the device with a USB memory stick or download it directly from the comput er to the device with a USB cable. Even in the same job, you can set different colors in the software and drill holes. The machine has doors that can be opened to accommodate larger materials.
Adjust the workbed up or down from the control panel and the provided sensors will let you automatically adjust the laser beam to compensate. Automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist to blow debris clear of the laser as it is created. Ainly used for laser cutting and engraving of. Metallic materials, such as clothing fabrics, leather, leather goods, wood products, paper, shellac, plexiglass.
The TL-A1 is a motion control system for small laser engraving and cutting machines, based on 2.4 color screen design, with more optimized space design. Support 3-axis motion control and 1-way laser control, equipped with laser engraving and cutting software. Export menu, support custom development. Laser tube provides 100W of power for up to 8000 hours or up to 12000 hours of operation when consistently used at lower settings.
Software Compatible - The running system of our machine is Windows, but if you use the Lightburn, our machine can also compatible with iOS system & Linux. Reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to.
Gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, c. Eramics, tile, fiberglass, marble, stone, and more-even before you open the integrated pass-through doors that permit you to work on even larger pieces! Engrave or cut almost all non-metallic materials. Supports USB2.0, offline U-Disk and WIFI to transfer data. A large, fully transparent acrylic plate. The whole working area and the working process come into view. The power supply is equipped with an LCD display. The LCD display shows the current and automatically detects errors. When problems occur, you can troubleshoot according to the instructions. The power supply and motherboard of our machine are installed separately to effectively avoid magnetic interference.The performance of the machine can be kept optimal. No additional installation required, simplifies installation. Gases and heat in the working area. Making engraving and cutting always efficient and accurate. The speed, power and other settings can be adjusted through the control panel.
With the raster graphic/color vector assignment system. You can adjust the engraving speed and power by color coding.
Reinforced and more robust machine housing ensures safe transportation and longer service life. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
The widened viewing window is made from. To ensure lasting safe use. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work.The water cut protection system protects the laser tube from being burned out. If the water cooling system fails suddenly, the temperature of the laser tube will rise. At this moment, the water protection system will immediately cut off the power supply to the laser tube to prevent the laser tube from being burned out. The E-Stop safety button immediately stops the machine in case of emergency. Tool lets you quickly correct the focus of your laser directly from the control panel without any need to bother with troublesome acrylic tools and tedious manual adjustment.
Experience UK-Based Support & Service - Our company is headquartered in the U. And has warehouses all over the world. FDA compliant laser warning light. A red light indicates that the machine is working and needs to pay attention to safety; A green light indicates that the machine is ready to work. The honeycomb cutting platform provides stability, noise reduction and heat resistance for smaller items.The aluminum blade cutting platform provides adjustable height and intense rigidity for larger items like acrylic blocks. Front and rear double-pass doors. The worktable can be moved up and down to fit a variety of engraving materials and products.
If you do not like the goods and would like to return them to us, please see below. Before returning the goods to us, please tell us first. Please return the goods to us within 7 days after you have received the goods. Please confirm the goods as original packing.But please do not forget to send us some clear photos. We offer detailed product descriptions and images to give you a real advantage in finding the products you're looking for.
We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that's why our customers keep coming back. After you have ordered, you must pay within 7 days.