ATOMSTACK Laser Engraver S10 PRO 50W High Accuracy DIY for Wood and Metal

  
ATOMSTACK Laser Engraver, S10 Pro 50W Laser Engraving Machine. 10W Output Power Laser Cutter Supports LightBurn. High Accuracy DIY Laser Engraver for Wood and Metal 410x400mm. FACTORY SEALED IN ORIGINAL BOX.

10W Laser Power Thick Cut: ATOMSTACK S10 Pro laser cutter and engraver machine has 50W machine power and 10W laser output power. Combining 2 laser beams into 1, S10 Pro Laser cutting machine can cut 1520mm thick wood, engrave mirror, stainless steel metal, ceramics, glass, at a speed up to 10000mm/min. High Performance Fixed-Focus Laser: Automatic fixed focus, no need to adjust the focus before engraving. The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, combined precision engraving and high energy cutting at the same time.

Ultra-fine laser focus area is reduced to 0.080.06mm. The motion accuracy is up to 0.01 mm. Sturdy and Safe Structure Design: All-aluminum alloy anodized structure design makes the machine more durable. 410x 400mm large engraving area can meet your various engraving needs. It's also equipped with a horizontal gyroscope and an emergency pause switch button, which can automatically or manually pause your engraving work in the event of an accident. Eye Protection Function: Newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light. You do not need to wear goggles and could watch the engraving clear. Reduce the cost of your goggles and the inconvenience of wearing them.

Wide Compatibility: ATOMSTACK S10 Pro laser cutter machine is compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(may need paid), support Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11, and support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Engraving can be finished without connecting to a computer. Engraving groups can be built and make multiple machines work at the same time, improving work efficiency significantly. Light Combining Technology with Double Compression Spots. Combining two 5W lasers into one, Atomstack's innovative technology makes the laser powered larger and more stable.

The double compressed spot increases the power while maintaining a fine laser beam. Speeds up to 10,000mm/min. The real 10W laser can easily cut through 1520mm thick wood and 15mm acrylic materials, engrave large areas of metal and wood. The compressed spot of S10 Pro laser engraver is reduced to 0.080.06mm while the motion accuracy is up to 0.01 mm. Limit switches are installed on both X-axis and Y-axis.

When the engraving machine stroke is at its maximum, the limit switch will be automatically triggered to protect the laser and avoid collision. The newly upgraded laser module makes the engraving clearer, cutting more neatly, and brings you a brand-new experience. Double-compressed spot technology makes the laser spot down to 0.06mm to achieve finer image engraving. Fixed focus laser, no need to focus. Protect the user's eyes and prevent pets from grabbing the laser spot.

LaserGRBL, LightBurn(paid), support Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 system, Mac OS and Linux. NC, BMP, JPG, PNG, DXF, etc. USB Cable, Wi-Fi, APP and TF Card. Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge. Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate.

Screen blank cause the emergency stop button is pressed, turn the emergency stops button clockwise to start the screen, and it can use all functions directly without connecting to WiFi. When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

Please do not touch the laser emitter with your hands, or it may burn your hands. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need parent supervision.

The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.