Activate protection position: There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop. Laser beam safety guard: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop moving, the laser beam will stop, to avoid fire. High speed: The engraving speed could be up to 3000MM / Min. (If you don't consider the laser carving result, the moving speed could be up to 1000MM / S). It could preprocess 32 instructions, support baud rate up to 921600, more powerful, suitable for laser engraving cutting.
Motherboard: 32-bit motherboard with STM32 MCU. Firmware: Ortur laser master Firmware. Higher computer operating system: Windows (works with LaserGRBL), MAC OS and Linux (works with LightBurn).Laser engraver power: 36W, 12V 3A. Electric power of laser module: 20W. Default Focal Length: 55MM for 15W and 20W laser module; 58MM for 7W laser module. Input format: NC BMP JPG PNG DXF, etc. Carving speed: 3000MM / Min and less.
Image size: No limit (the pixel precision could be adjusted freely, and the default value is 300 pixels per inch, it is about 0.81 um pixel precision). 1 setLaser Engraving Cutting Machine. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.Please allow slight dimension difference due to different manual measurement. OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making".
The seller is "centerbuyer" and is located in this country: GB. This item can be shipped to United Kingdom.