High power: ATOMSTACK A40 Pro, as the most cutting-edge laser engraving machine, has the highest 40W optical power in the industry, which is suitable for professional work and greatly improves work efficiency. It can cut through 18mm basswood, pine and paulownia wood at one time, and 9mm mdf density board. At the same time, it can cut through 0.1mm stainless steel sheet at one time. New motion structure: Different from Atomstack's previous machines, Atomstack A40 Pro adopts a more stable linear guide X-axis, which makes A40 Pro work stably at a high speed of 600mm/s, and the engraving and cutting lines are smooth without shaking.
Tank chain bundling: In order to make the machine more beautiful and structurally stable, the Atomstack A40 Pro adopts a tank chain wire bundling scheme that is not available in other models. The wire harness runs smoothly without entanglement, improving the wire life.
Professional cutting machine: adopt the most stable 40W high optical power laser module at present. The latest 8 6W laser coupling technology, the peak power can be as high as 48W, can cut 20mm basswood, 25mm pine and paulownia, 12mm mdf density board. The product is equipped with F30 Pro upgraded version air kit as standard: it is equipped with air assist as standard, and the cutting ability has been greatly improved. At the same time, the cutting accuracy and cutting quality can also be greatly optimized, making Atomstack A40 Pro a real professional laser cutting machine. Upgrade Atomstack's self-developed 32-bit motherboard: built-in 256-bit color scale map, which makes the engraving work more delicate and has higher contrast, so that your engraving is not only black. New non-blocking laser: The new A40 laser has a built-in tool-free focusing module, and a built-in air assist system, without the interference of wires, simple and beautiful. The patented double-layer wind gathering cover design can ensure that the laser will not be blocked and the lens will not be polluted for a long time, which greatly improves the life of the laser. It is small in size and multi-functional, bringing a new control experience. Come on give it a try. New filter panoramic glass eye protection design: The panoramic filter glass protector protects your eyes very well, filtering 97% of ultraviolet light, and you and the people around you can watch laser engraving without wearing goggles. Reduce your goggle expense and inconvenience of wearing goggles. Sturdy and easy-to-install structural design: The all-aluminum anodized structural design makes the machine more durable and improves the engraving accuracy. The whole structure has been designed for quick installation, and the installation can be completed in generally 20-30 minutes. Wide compatibility: the machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports for Win XP / Win 7 / Win 8 / XP / Win 10, also supports for MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF, etc.Upgraded compressed spot coupling technology: ultra-fine laser focus area reduced to 0.10.1mm, high-density laser can easily cut thick wood board, black acrylic; it can directly engrave mirror stainless steel metal, ceramics, glass, and the engraving and cutting speed is 40% higher than that of 30W, comparable to the cutting effect of 80W CO2 laser engraving machine. Integral screw rod: The machine uses an integral screw rod instead of a combined shaft coupling. The stepping motor and the screw rod are integral, which makes the movement of the laser more precise and the coupling more durable. Laser sintering temperature up to 3000??
Safety protection: Equipped with an emergency stop button, if there is an unexpected situation, the machine can be stopped at any time, and it is equipped with a reset switch and a limit switch to engrave more safely. Expandable engraving size: Modular design of the body mechanism, only need to replace the Y-axis frame components, you can get 850400mm super large engraving size. Specifications: Product model: ATOMSTACK A40 Pro Engraving size: 400400mm Engravable/cuttable materials: Engraving material: wood, bamboo, cardboard, plastic, leather, PCB board, alumina, non-reflective electroplated layer and paint layer metal, 304 mirror stainless steel, glass, ceramic, cotton cloth, slate; Cutting materials: cardboard, non-woven fabrics, wood board, plywood, acrylic (transparency needs to be painted black), some thin plastic plates, sponge, metal sheets such as aluminum and stainless steel; Whole machine power: 210W Laser power: 180W (in cutting mode) Laser output optical power: 40-48W Laser wavelength: 455?? 5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no focusing Laser protective cover: There is a protective cover on the laser to protect the user's eyes, and there is no need to wear additional protective glasses. At the same time prevent pets from scratching the laser spot.Operating software: LaserGRBL, LightBurn, support for Win XP/Win 7/Win 8/XP/Win 10 system Supported file formats: NC, BMP, JPG, PNG, DXF Data transfer method: USB connection Power supply: International standard power input: 100-240V AC, 50/60Hz output. Certification: CE, FCC, RoHS, FDA, PSE Precautions: When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. Do not touch the laser with your hands, or you may burn your hands. Please avoid strong impact on the machine. Children under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision.
Do not apply the laser directly to any specular reflective objects, which may cause injury to the operator or burn the laser. Notes: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
Please allow 1-3mm measuring deviation due to manual measurement. Thank you for your understanding!
Packing list: 1xLinear guide X-axis assembly 1xProfile on the base 1xProfile under the base 1xLaser module 2xTank chain 1xF30 Pro dual pump air assist 1xMounting screw 1xTool bag 4xFoot pad foam 1xFixed focus film 3xAcrylic sheets 3xWood chips 10xWire ties 1xDesiccant 1xBrush 1xDust-free cloth 1xCard Reader 1xTF card 1xPower adapter 1xManual 1xData cable 1xY axis left profile 1xY axis right profile 3xFoot bracket.