ATOMSTACK 24000mm/min Engraver Machine DIY Engraving Cutting Machine W8O7
High Engraver: Engraving is increased by 2 times: using the latest technology, it can realize 24000mm/min high- engraving, and the is increased by 2 times. Whether you are a manufacturing industry or an individual user, our products can meet your needs, improve work efficiency and shorten production. 400x400mm large working area provides boundless space. New structure: The linear slide rail + design enhances the structural accuracy and optimizes the wiring arrangement, thereby improving the accuracy and stability of the product. This design can also reduce the noise and of the machine, providing a better working environment. High Accuracy: New 50mm long focal length source, leading cutting ability. Not only can the cutting efficiency be improved, but also the cutting quality and can be enhanced. New Focusing Device: Adjust the focal length more accurate: equipped with a new focusing device, you can adjust the focal length more accurate. This design can not only improve the cutting quality, but also make the cutting easier and more convenient. In addition, our focusing devices can be adapted to different thicknesses of materials. The second- APP control: Adopts the second- APP control, including cutting model material library, rich design functions and stable connection control. This design allows users to operate the cutting machine more conveniently, improving work efficiency and cutting quality. Upgraded Dual Coupling Technology: The ultra-fine area is reduced to 0.050.05mm, and the high-density can easily cut 10mm balsa wood, 10mm paulownia wood, 5mm basswood plywood and 12mm thick black acrylic; it can directly engrave mirror stainless steel metal, ceramics, glass, etc. The engraving & cutting is 40% higher than that of the non- model, which is comparable to the effect of a 90W? 6W Engraving and Cutting Ability: Suitable for a variety of material processing: suitable for carving wood, bamboo, cardboard,, leather, board, oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slat and other materials. Extensive Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, and also supports system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc. Integral Screw: The machine uses an integral screw instead of a combined shaft connector, the stepper motor and the screw are integrated, which makes the movement more accurate and the coupling more. Safety : The new panoramic filter protective cover can your eyes very well, filtering 97% of ultraviolet, you and the people around you can watch the without wearing Sculpture. Reduce your expense and inconvenience of wearing.
Specification: Product model: ATOMSTACK Maker V2 Engraving size: 400400mm : 40W output optical : 5.5-6W wavelength: 455±5nm Engraving accuracy: 0.01mm Focusing method: fixed, no need to : 0.050.05mm Product material: circuit board V/PWM modulation board Wire: 22#2P2.54 terminal reverse wire 80mm Optical lens:? 6/glass Fan: Beam Mode: Working mode: pulse work size: 0.050.05mm Working : 10000H Working : 0?
Sintering : 800°C Carving material: Basswood pine paulownia, plywood, yellow peach, mahogany, bamboo, kraft paper,, leather, board, oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, plate, Density board, kraft paper, non-transparent acrylic board, resin, artificial bovine bone, rubber, high-density foam board, oil painting paper, A4 paper, leaves, etc. Cutting material: Kraft paper, non-woven fabric, hardwood, paulownia, basswood, pine, less than 2MM bamboo, cork, low-density foam board, non-transparent acrylic, less than 2MM thick ABS, and other sheets, sponge, etc. Protective cover: there is a protective cover on the to the user's eyes, no need to wear additional protective glasses. At the same pets from grabbing the point Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10 system Supported file formats NC, BMP, JPG, PNG, DXF, Data transmission method: USB connection : AC, 50/60HZ Output: 5A Machine Size: 641565218mm/25.5x22.2x8.5in (LWH) Machine Weight: 4KG Package Size: 59 x 38 x 16.5cm/23.2x14.9x6.4in Package Weight: 6230g/13.7lb. Before operating the engraving machine, please read the manual carefully. When operating the engraving machine, please install the protective cover; if it is not installed, you need to wear. Do not the with your hands, or you may burn your hands. Please strong impact on the machine. Under the age of 14 are prohibited from using this product, and over the age of 14 need supervision. Do not apply the directly to any specular reflective objects, which may cause injury to the operator or burn the. Transparent acrylic cannot be engraved directly.
Packing List: 1 x ATOMSTACK Maker V2 Engraver 1 x Mounting screw 1 x tool bag 4 x foot pad foam 3 x acrylic sheet 3 x wood chips 10 x wire tie 1 x desiccant 1 x brush 1 x cloth 1 x 1 x glasses 1 x manual 1x data cable 1 x module 1 x X- assembly 1 x Y left profile 1 x Y right profile 1 x profile on the base 1 x Base lower profile 3 x foot bracket.