Cutting Engraving Laser

900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal

900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal
900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal

900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal    900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal
The laser engraving machine can improve the engraving efficiency, make the surface of the engraved part smooth and ro. Und, quickly reduce the temperature of the engraved metal material.

Ion and internal stress of the engraved object. The laser engraving machine ha.

S a wider range of applications, hig. Her engraving accuracy and faster engraving speed. New laser engraving and cutting machine. This machine is a CO2 laser tube laser engraving mesh system, used to engrave. Wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.

The most suitable and preferred equipment for advertising, gifts, shoes, toys and other industries. Pports multiple graphic formats like. HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.

RuiDa draw DSP control system. This device also supports advanced software such as.

If you change the device settings of the design file, you must connect the computer with a USB cable. You can transfer the file to the device with a USB memory stick or download it directly from the computer to the device with a USB cable. Even in the same job, you can set different colors in the software and drill holes. It can separate the legs from the main body of the machine. The machine has doors that can be opened to accommodate larger materials. The machine can process the following materials: wood, rubber, acrylic, delrin, fabric, leather, paper, fiberglass, plexiglass, tile, plastic, marble, cardboard, melamine, mylar, chipboard, wood veneer, cork, corian, etc. DO NOT carve or cut metal! The machine is suitable for the following areas: woodworking, textile cutting, industrial prototyping, industrial identification, sign making, aerospace design, architectural modeling, plastics, stamps, picture framing, gift making, barcode, gasket cutting, puzzle making, furniture making, awards and trophy engraving, personalization, Door handles, sewing patterns, knuckles, inlays and overlays, music boxes, router templates, jewelry, crafts. After 3-4 hours of work, there should be a break of about 30 minutes. , this device supports multiple graphic formats including.

HPGL, BMP, GIF, JPG, JPEG. This device is compatible with. Windows 2000, Windows XP, WIN7, WIN8, WIN10.

An acrylic glass window covers the work bed to view the engraving process. The sealed C02 laser beam has a power of. A wavelength of 10.6µm.

The upgraded mount creates stable laser beams for faster ones. Cutting speeds and an extended service life.

With built-in through entrances allows you to easily engrave longer objects. A well-known brand of the external electromagnetic air pump for the engraving machine. Has higher air pressure and sufficient air volume, which can better. Protect the lens and have be.

Tter flame retardant effect on the engraving material. The industrial-grade laser head delivers a stable laser beam over the long life of the machine, and the red dot pointer indicates the engraving point and marks the machine's path, making project setup effortless. The integrated blowing system cools and ventilates the device and removes potentially hazardous deposits such as smoke and combustible gases. Conveniently placed access doors on both sides of the machine allow you to carry out repairs without additional effort. The laser tube is installed in the device itself.

No need to reinstall and debug, it is more convenient to use. Suitable for various engraving and cutting object sizes. Light weight, high strength, good rigidity, high flatness. Not easy to damage and deform.

The honeycomb panel overcomes the shortcomings of the original aluminum work table, which is easy to curl and not resistant to high temperature and deformation is. Is present on all our machines. This allows you to cut materials larger than your bed size by pushing them through the engraving table. Working humidity: 5%-95% non-condensing water.

Operating temperature: 5-50 degrees Celsius. Laser type: CO2 sealed laser tube. The working principle of the laser: high-voltage discharge excites high-concentration CO2 gas to produce a laser with a wavelength of 10.6um. Drive Type: Digital Stepper Motor Subdivision Driver.

Working motor: 57 hybrid stepping motor. Engraving Area: 900mm x 600mm (35.43" X 23.62"). Work platform: Hollow flat platform. Workbench adjustment: Electric up and down 50cm. Cooling mode: forced water circulation.

Engraving and cutting depth: 0-10mm (for reference only, subject to different materials and performance). Engraving and cutting accuracy: =1000dpi. Separation Cutting: Up to 256 layers of color separation and cutting. Auxiliary positioning: red light positioning, safety protection bubbles flame retardant, water cut protection, open cover protection.

Software support: Coreldraw output, AutoCAD output. Software environment: WindowsXP, WIN7, WIN8, WIN10.

Support Graphic Format: All formats recognized by CORELDRAW and AUTOCAD, such as JPG, BMP, AI, PLT, etc. Data transfer: USB2.0, network port, offline U disk. Certification: FDA, CE Certification, ISO9001 Quality Certification.

If you don't like the goods and want to send us back, please see below. Before you return the goods to us, please tell us at first. Please return the goods to us within 7 days after you receive the goods. Please confirm you pack the goods as original. But please don't forget to send us some clear photos.

Due to the time difference, maybe we can't reply your question in time. We are ready to help you to get a satisfactory result. We have warehouses in United Kingdom.

For those customers living in United Kingdom, we send items from the appropriate warehouse. After you place the order, you must pay within 7 days. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "globalmachinebest001" and is located in this country: GB.

This item can be shipped to United Kingdom.
  1. New: Aluminum plate
  2. Working humidity: 5%-95% non-condensing water
  3. Software support: Coreldraw output, AutoCAD output , lightburn
  4. Data transmission: USB2.0, network port, offline U disk
  5. Power supply: AC220±10% 50HZ
  6. Material: Metal
  7. Cutting speed: 0-600mm/s
  8. Brand: Unbranded
  9. Type: Cutting Tool
  10. Unit Type: kg
  11. Software environment: Windows XP, WIN7, WIN8, WIN10
  12. Engraving area: 900mmX600mm
  13. Engraving and cutting depth: 0-10mm(depending on material)
  14. Unit Quantity: 1
  15. Country/Region of Manufacture: China
  16. Laser power: 100W
  17. Engraving speed: 0-800mm/s

900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal    900x600mm 100W CO2 Laser Engraver Cutter Laser Engraving Cutting Machine Metal