The laser engraving machine can improve the engraving efficiency, make the surface of the engraved part smooth and round, quickly reduce the temperature of the engraved metal material, and reduce the deformation and internal stress of the engraved object. The laser engraving machine has a wider range of applications, higher engraving accuracy and faster engraving speed. New laser engraving and cutting machine. This machine is a CO2 laser tube laser engraving mesh system, used to engrave. Wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass.
The most suitable and preferred equipment for advertising, gifts, shoes, toys and other industries. Supports multiple graphic formats like.
L, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc. RuiDa draw DSP control system.
This device also supports advanced software such as. If you change the device settings of the design file, you must connect the computer with a USB cable. You can transfer the file to the device with a USB memory stick or download it directly from the computer to the device with a USB cable. Even in the same job, you can set different colors in the software and drill holes. It can separate the legs from the main body of the machine.
The machine has doors that can be opened to accommodate larger materials. The machine can process the following materials: wood, rubber, acrylic, delrin, fabric, leather, paper, fiberglass, plexiglass, tile, plastic, marble, cardboard, melamine, mylar, chipboard, wood veneer, cork, corian, etc. DO NOT carve or cut metal! The machine is suitable for the following areas: woodworking, textile cutting, industrial prototyping, industrial identification, sign making, aerospace design, architectural modeling, plastics, stamps, picture framing, gift making, barcode, gasket cutting, puzzle making, furniture making, awards and trophy engraving, personalization, Door handles, sewing patterns, knuckles, inlays and overlays, music boxes, router templates, jewelry, crafts. Note: After 3-4 hours of work, there should be a break of about 30 minutes.
, this device supports multiple graphic formats including. HPGL, BMP, GIF, JPG, JPEG, DXF, DST, Al and.This device is compatible with. Windows 2000, Windows XP, WIN7, WIN8, WIN10. An acrylic glass window covers the work bed to view the engraving process. The sealed C02 laser beam has.
A wavelength of 10.6µm. The upgraded mount creates stable laser beams for faster ones cutting speeds and an extended service life. 28"x20" (700mmx500mm)engraving area. With built-in through entrances allows you to easily engrave longer objects.A well-known brand of the external electromagnetic air pump for the engraving machine. Has higher air pressure and sufficient air volume, which can better. Nd have better flame retardant effect on the engraving material. The industrial-grade laser head delivers a stable laser beam over the long life of the machine, and the red dot pointer indicates the engraving point and marks the machine's path, making project setup effortless. The integrated blowing system cools and ventilates the device and removes potentially hazardous deposits such as smoke and combustible gases. Conveniently placed access doors on both sides of the machine allow you to carry out repairs without additional effort.
Talled in the device itself. No need to reinstall and debug, it is more convenient to use. Suitable for various engraving and cutting object sizes. Light weight, high strength, good rigidity, high flatness. Not easy to damage and deform.
The honeycomb panel overcomes the shortcomings of the original aluminum work table, which is easy to curl and not resistant to high temperature and deformation is. Is present on all our machines. This allows you to cut materials larger than your bed size by pushing them through the engraving table.Working Humidity: 5%-95% without condensation. Operating temperature: 5-50 degrees Celsius. Laser type: CO2 sealed laser tube. Laser working principle: high voltage discharge energized.
Highly concentrated CO2 gas to generate a laser with a wavelength of 10.6 µm. Drive Type: Digital Stepper Motor Partition Driver. Working motor: 57 hybrid stepper motor. Workbench adjustment: electric up and down 22cm. Engraving cutting depth: 0-10mm (for reference only, subject to different materials and performance).
Engraving and cutting accuracy: =1000dpi. Separation Cutting: Up to 256 layers of color separation and cutting. Auxiliary positioning: red light positioning. Safety protection: blown flame retardant, water cut protection, open cover protection. Software name: RDdrawDSP control system.
Software support: Coreldraw output, AutoCAD output, lightburn. Software environment: Windows XP, WIN7, WIN8, WIN10. Image format: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI. Data transmission: USB2.0, network connection, offline U disk.
Power supply: AC220±10% / 50Hz. Packing: standard export wooden case.FDA, CE Certification, ISO9001 Quality Certification. If you don't like the goods and want to send us back, please see below. Before you return the goods to us, please tell us at first. Please return the goods to us within 7 days after you receive the goods. Please confirm you pack the goods as original. But please don't forget to send us some clear photos. Due to the time difference, maybe we can't reply your question in time.
We are ready to help you to get a satisfactory result. We have warehouses in United Kingdom.
For those customers living in United Kingdom, we send items from the appropriate warehouse. After you place the order, you must pay within 7 days. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "braveshop2" and is located in this country: CN.This item can be shipped to United Kingdom.