80000MW CNC Blue Laser Engraving Machine 80W Cutter 400x400mm DIY Lazer Engraver

  

This machine is a full set of parts, required installed on their own, giving the purchaser to install software and tutorials. We would like to remind you that we have not provided a paper manual with our product in order to protect the environment. However, we have included all assembly instructions and software drivers on the red USB storage card that you have received. If you encounter any problems during the decompression or software use process, please feel free to contact our customer service staff, and we will provide assistance as soon as possible. Model: 400400mm Laser Engraver Machine.

Install 80W 40mm laser : 380380mm working area. 32 bits motherboard with 32 Bits MCU, It can process 32 instructions at a time, greatly increasing the file processing speed. Laser power range could be S0 - S1000. Larger power adjustment range, freely adjust according to your needs: If you want the ax power, just set minS999, max1000.

(If do not consider the laser carving result, the velocity of movement could be as high as 60000mm/min). Active Position Protection: It will be turned on with a strong alarm sound in these three cases.

Machine was moved during working. Power=1, the laser turn on > 5S still not start working. Single motor setting, one drive module corresponds to one motor, which can increase the current while reducing the weight of the machine body and improve the running speed of the machine. Limit switch: XY axis limit switch.

Protect the normal operation of the machine. Exposure Duration Detection and Limitation. If laser engraver is under control without anybody notice, it will be turned on to make the machine stop working.

X-axis adopts eccentric nut design. This machine uses eccentric nuts to avoid X-axis shaking, making the machine more stable. This machine adds a slider on the X axis to install the laser and has better heat dissipation, which is helpful for the adjustable focus laser to adjust the focus, and it is easier to replace the laser. Make the machine cable clean and not entangled, more beautiful and convenient.

If connect offline and USB together, the machine will choose USB; only connect offline separate, the machine will work offline. Reduce assembly time and be more friendly to newcomers. Laser Wavelength: 445nm (blue viole). Drive mode: External ACC constant current drive. Cooling Method: Forced air cooling.

Shell Material: Aluminum, Surface Anodized. There is a red USB disk in the package, which contains the installation manual and software information.