700500mm 80W CO2 Laser Engraver Cutting Machine with Rotary Axis, Power Supply

  

Our 80W laser power supply is designed to deliver greater than 90% efficiency, 47-440Hz frequency, and quick 1-millisecond response times for your CO2 laser engravers and cutters. Our compact and handy power supply can be directly connected to a wide variety of 80W or lower laser devices, offering excellent compatibility. Precisely control the power of the laser with 0-5V analog or PWM signals. Test the working current of your laser using the closed-loop feedback and simplify your troubleshooting with the convenient physical TEST button.

Enjoy easier engraving and a long service life: this laser power supply has been rigorously quality tested and boasts a mean time between failure greater than 30000 hours thanks to its simple TTL level control and open-circuit fault protection. HIGH PERFORMANCE: Orion Motor Tech's 80W laser power supply delivers excellent performance with greater than 90% efficiency and fast 1-millisecond response times. Get the most out of your laser tube with our safe, stable, and capable power supply.

INTUITIVE CONTROL: Easily toggle power by TTL level. If you need more precise control, you can adjust your laser power with 0-5V analog or PWM signals. The separate TEST button also speeds fault detection, so you can troubleshoot system problems with ease. REAL-TIME LCD DISPLAY: The built-in LCD display conveniently provides the output current amperage as well as the status of the laser and its water protection system, so you can easily monitor your laser engraver.

SIMPLE INSTALLATION: Each connection port is clearly labeled to facilitate quick and easy installation, and the connectors from similar models easily plug in directly. OPEN-CIRCUIT PROTECTION: A protection circuit combined with a well-grounded enclosure ensure our power supply properly handles open-circuit faults and increases the service life of our power supply and your laser tube. Material: Iron, Copper, ABS Plastic. Dimensions: 197 x 161 x 91 mm 7.8x 6.3x 3.6 in.

Mean Time Between Failure (MTBF): 30000 hr. High-Level Voltage Range: 3.0V. Low-Level Voltage Range: 0.7V.

Operating Environment: -30 to 65C (-22 to 149F). Cooling System: Forced-Air Cooling (FAC). Temperature Testing: Tested to Operate at Full Load for 12 hours at 60 (140). Start/Stop Testing: Turned On and Off 500x in 7 sec. Weight: 2.1 kg 4.6 lb.

1 x 80W Laser Power Supply. ENGRAVE ROUND SURFACES This rotary axis table attaches to your laser engraver machine, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, bottles, pipes, bowls, drums and tubes etc.

It features an upgraded NEMA 17 stepper motor made of corrosion-proof iron and aluminum. FOR MACHINES 50W & ABOVE: This product is compatible with all laser engraver machines 50 Watt and above that accept a 2-phase, 4-wire motor attachment.

Please check the size of the connector (connectors are interchangeable). Please double check your laser engraver machine information: the motor (2-phase), and wire (4-wire). See Product Description section for full specifications.

ENGRAVING TABLE HEIGHT: This rotary axis has a height of 2.36. Please ensure the space between your machines laser head and engraving table can accommodate this added height. Adjustable axes distance up to 2.87 to process a wide range of cylinder diameters. SIMPLE INSTALLATION: Just connect the cable of the rotary axis with the cable port on the engraver machine. Configure the attachments settings using your laser engravers software, and you are ready to start printing on round objects! This product is suitable for DIY, home businesses, start ups, and industrial use. User manual and 24/7 customer service support help ease the installation and troubleshooting process. Motor type: two-phase, four-wire stepper motor. Stepping/Stepper motor: NEMA 17(42BYG). P1.0= A P1.1=B P1.2=B" P1.3=A". A+(Red), B+(Blue), A-(Green), B- (Black). Product dimensions: 14.96 x 6.1 x 3.15.

1x Rotary Axis Attachment for Laser Engraver/Cutter Machine. Engravings on round objects are always demanding, but this Orion Motor Tech Rotary Axis has the capabilities to help you get the job done right. Our innovative rotary axis adds a new dimension to your production by allowing you to engrave on cylindrical or irregularly shaped objects 2-14 inches long and 0.4-6 inches in diameter, including cups, bottles, tubes, balls, and more! Featuring a closed-loop system that ensures maximum torque with rock steady performance, the 2-phase Nema stepper motor functions with high efficiency to save you time.

Easy to install and use, our rotary axis attachment easily works with all OMT laser engravers except our 40W engraver. Get the most out of your laser engraving equipment with Orion Motor Tech! ENGRAVES CYLINDRICAL SURFACES: This OMT rotary axis easily works with most laser engravers rated above 50W to let you perform 360-degree engravings on cylindrical or round objects such as cups, bottles, tubes, pipes, bowls, and more! 2 SETS OF DRIVE WHEELS: With a 12-inch maximum distance between the two sets of drive wheels, this rotary axis attachment is ideal for objects 2-14 inches long and 0.4-6 inches in diameter.

STABLE PERFORMANCE: This rotary cutter attachment features a 2-phase stepper motor with a closed-loop feedback control system designed to automatically provide perfect performance. SMOOTH NOISE-FREE OPERATION: This rotary tool features a precision-engineered tailstock that allows for smooth, efficient, and noise-free operation that is ideal for DIY, home, or industrial use. EASY INSTALLATION: Connect the 4-wire cable to the port on your laser engraver and configure your software and you'll be ready to start carving your circular designs right away. Base Dimensions: 20" x 6" (49x15 cm). Cable Length: 5'11 (1.8 m).

Distance between Wheels: 12 (30 cm). Motor: Nema 23 2-Phase Stepper Motor.

Net Weight: 13.2 lb. Our innovative rotary axis adds a new dimension to your production by allowing you to engrave on cylindrical or irregularly shaped objects 0.8-8.6 inches long and 0.2-3.1 inches in diameter, such as cups, bottles, tubes, balls, and more! In order to provide accurate positioning and repeatability of movement, our rotary axis attachment uses a quality 2-phase stepper motor which also maximizes your operational stability.

Featuring a highly adaptable tailstock that allows you to adjust the thimble length as needed, this auxiliary rotary axis is ideal for workpieces requiring extreme precision. ENGRAVES ROUND SURFACES: This OMT rotary axis can easily work with most laser engravers 50W or higher to let you perform 360° engravings on cylindrical and round objects such as cups, bottles, tubes, pipes, bowls, and more! WIDE RANGE: This CO2 laser engraver attachment works on objects between 0.8 and 8.6 inches long and 0.2 to 3.1 inches in diameter. HIGHLY DURABLE: Made of tough iron and aluminum alloy, this rotary cutter and engraver attachment features a corrosion-proof coating to ensure long-term & reliable use.

EASY INSTALLATION: You just need to connect the 4-wire attachment cable of this rotary tool to the dedicated port on your laser engraver and configure the settings in your software to get your carving started. SMOOTH NOISE-FREE OPERATION: This rotary accessory tool kit features a precision-engineered 3-jaw chuck and tailstock that allow for smooth, efficient, and noise-free operation that is ideal for DIY, home, or industrial use. Dimensions: 23" x 6" x 7 (58x15x18 cm).

Center Height: 3 (7.5 cm). Rail Length: 11.8 (30 cm). Engraving Length: 0.8"-8.6" (2-22 cm).

Engraving Diameter: 0.2"-3.1" (0.5-8 cm). Net Weight: 19.9 lb. Bring your ideas to life with our laser engraver series! This 80W laser engraver continues to uphold our high standards with its LCD display Ruida control panel, bundled edition of RDWorks 8, spacious 50x70 cm working area, and its front and rear pass-through doors that allow even larger pieces to be worked on. This laser cutting and engraving machine provides dual work platforms: a honeycomb bed for smaller objects and a firmer aluminium knife blade bed for larger, harder substrates like acrylic blocks. In addition to its high quality, durability, and the usual long service life, this laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and a digital power supply providing stable high-voltage current and real-time information on your engraver's status. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale.

Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. With our quality construction and precision engineering, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop.

80W LASER & POWER SUPPLY: This laser engraving and cutting machine is rated for 80W and can reach somewhat higher for short periods. Its digital power supply ensures a stable high-voltage current and provides real-time information on your engraver's status.

DUAL BEDS & PASS-THROUGH DOORS: This laser cutter offers a 50x70 cm 20x28 in. Workbed with both honeycomb and knife blade engraving platforms and 2 pass-through doors for processing even larger pieces. RUIDA DIGITAL CONTROLS: This laser engraver's Ruida panel features advanced functions to help you perfect your sophisticated engravings.

Its convenient LCD screen and Windows-compatible edition of RDWorks v8 provides complete control over the laser marking process. SAFE & EASY OPERATION: Password & key protection prevents unauthorised use; the wide viewing cover includes tinted eye protection & automatically cuts power when opened; and a built-in air assist quickly blows away smoke, dust, and sparks. ENGRAVE A MULTITUDE OF MATERIALS: Works with wood, rubber, plastic, paper, glass, leather, ceramics, tile, fabric, cloth, fibreglass, marble, cork, jade, acrylic, veneer, corian, coated metals, anodised aluminium, mylar, delrin, melamine, pressboard, matte board, and more non-metal materials.

Create custom jewellery, pendants, plaques, leather goods, signs, souvenirs, and more! Product Dimensions: 150 x 86 x 70 cm 59x33.9x27.6 in.

Engraving Area: 50 x 70 cm 20x27.6 in. Engraving Speed: 60 cm/s (23.6 ips). Cutting Speed: 40 cm/s (15.7 ips). Positioning Accuracy: ±0.01 mm. Workbed Elevation: 0-12 cm 0-4.7 in.

Compatible Operating Systems: Windows XP/7/8/10. Included Software: RDWorks v8.0. Data Transmission: USB Cable, Ethernet Cable, USB Flash Drive. Certifications: CE, FDA, CDRH, ISO9001.

Package Dimensions: 162 x 98 x 83 cm 63.8x38.6x32.7 in. Gross Weight: 175 kg 385.8 lb.

1 x 80W Laser Engraver. 1 x Allen Key Set. 1 x USB Stick with Software. 1 x Stainless Steel Clamp. We sincerely apologize for any inconvenience and thank you for your understanding.

B/OX/PO, LU, AL/BA/BB/BD, BH/BL/BR/BS, CB/CF/CH/CM, CO/CV/DA/DE, DY/EN/GL/GU, HA/HD/HP/HU, HX/IG/IP/KT, L/LE/M/ME, MK/N/NE/NG, NN/NP/NR/NW, OL/PE/PR/RG, RM/SG/SK/SL, SO/SR/SS/ST, SW/TW/UB/W, WA/WD/WF/WN, WR/WS/WV/YO. BN/CR/CT/CW, DH/DL/DN/E, FY/HG/HR/LL, LN/LS/RH/S, SA/SE/SM/SN, SP/TF/TN/TS/WA, EC/EH/EX/FK, G/LA/LD/ML, TA/TQ/WC, CA/DT/PL/TD, AB/DD/DG/KA, KY/PA/PH/SY. Other items you might also like. The item "700500mm 80W CO2 Laser Engraver Cutting Machine with Rotary Axis, Power Supply" is in sale since Thursday, March 25, 2021. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making".

The seller is "uluwtec_de" and is located in Walsall. This item can be shipped to United Kingdom.

1. Brand: Crenex
2. MPN: Does Not Apply