50W 500x300mm Co2 Laser Engraving Machine Laser Cutting Cutter Engraver UKCA

  
300X500MM 50w Laser Engraver Engraving Cutting Machine Laser Cutter DIY Crafts. 50W CO2 Laser Engraving Cutting Machine.

Engrave or cut almost any non-metallic material A large, fully see-through acrylic sheet observation window. The whole work area and work process come into view. Large working area 300 x 500 mm with integrated front and rear entrance and exit. The objects can fully penetrate the machine, so the extra long objects can be engraved/cut.

FDA compliant laser warning light. A red light indicates that the machine is working and needs to pay attention to safety A green light indicates that the machine is ready to work. The power supply is equipped with an LCD display. The LCD display shows the current and automatically detects errors.

If there are any problems, you can fix the errors following the instructions. Engraving Platforms: Honeycomb cutting platform suitable for various engraving and cutting object sizes. With the latch, the laser turns off when the lid is opened. The laser continues the previous work after the lid is closed again and the "Enter" button is pressed. A red dot pointer indicates the precise position of the engraving.

The point of origin of the laser can be clearly seen once the power supply is connected. Built-in air assist function and exhaust fan, no additional installation required, simplifies installation. They help clean the dirt, gases and heat in the work area, always making engraving and cutting efficient and precise. The water cut protection system protects the laser tube from being burned out. If the water cooling system fails suddenly, the temperature of the laser tube will rise. At this moment, the water protection system will immediately cut off the power supply to the laser tube to prevent the laser tube from being burned out. The speed, power and other settings can be adjusted from the control panel. The raster graphics/color vector mapping system allows you to adjust engraving speed and power through color coding. Supports network connection, USB port and USB flash drive. Reinforced and more robust machine housing ensures safe transport and longer service life. The worktable can be moved up and down to fit a variety of engraving materials and products. Autofocus - can focus automatically without the need to manually measure the focal length Note: After 3-4 hours of work, there should be a break of about 30 minutes. Machine Safety Certificate - Follow FDA standard, CE certification and ISO9001 quality certification 3.

Manual up/down table - Suitable for carvings of different sizes 4. Red dot pointer - Ensure visibility and show engraving position.

Control Panel -Easy to use, speed, power and other settings can be adjusted. Using 50W CO2 laser tube -The carving will be smooth and precise. Raster/Vector Color Mapping - Allows changing engraving speed and power by color coding. Improved and thickened body - Absolutely make the transportation safer and extend the service life.

Support USB connection and U disk -USB connection, convenient for you to watch through computer 11. Water cooling and protection system -Can lower the temperature of the laser tube and make it work longer 12. Air assist function and exhaust fan system - Helps the cutting surface to always clean dirt, gas and heat, making engraving and cutting projects a breeze 13. Supports multiple graphic formats -JPG/BMP/AI/PLT and so on. The device is equipped with CorelDraw, AutoCAD, Illustrator. AutoCAD and other advanced software DSP control system is compatible with. However, it is not compatible with Mac Ios. Working Humidity: 5%-95% No water drop environment 4. Laser type: carbon dioxide glass laser 6. Laser working principle: high voltage discharge excites highly concentrated carbon dioxide gas to produce a laser with a wavelength of 10.6um 8. Drive Type: Digital two-phase stepper driver 9. Working motor: 57 hybrid stepping motor 10. Workbench adjustment: electric platform moving space 20cm 12. Laser cooling mode: External circulating water cooling 13.

Engraving cutting depth: 0-10mm (For reference only, subject to different materials and performance) 17. Auxiliary positioning: red light positioning 18. Safety protection: blown flame retardant, water cut protection, open cover protection 19. Collaboration software: CorelDraw, AutoCAD, lightburn 21.

Support graphic format: JPG, BMP, AI, PLT, etc. Data transfer: USB2.0, U disk, WIFI 24. Power supply: AC220 ± 10% 25. Minimum Shaped Text: 2mm2mm 26. Smallest Shaped Letter: 1mm1mm 27.

Support Language: Simplified Chinese, English, Traditional Chinese, Korean, Russian, Italian, Spanish, Portuguese, Vietnamese 28. Standard accessories: forced water circulation pumps, maintenance tools, smoke exhaust pipes Package Contents 1.1X main body 2.1X exhaust fan (installed in the machine) 3.1X air pump (installed in the machine) 4.1X communication cable 5.3X reflective optics (installed in the machine) 6.1X focusing optics (installed in the machine) 7.1X laser tube (installed in the machine) 8. Other tools 9.1X User Manual (CD) 10. 11.1X Circulating Water Pump.

Weekend orders are dispatched within 2 days. This item is in the category "Business, Office & Industrial\Printing & Graphic Arts\Sign-Making". The seller is "engravingmachinebest1" and is located in this country: GB.

This item can be shipped to United Kingdom.

1. Model: 50W - grey blue
2. Cooling mode: forced water circulation
3. Power supply: AC220 ± 10% 50Hz
4. Material: Metal
5. Cutting speed: 0-600mm/s
6. Brand: Unbranded
7. Type: Cutting Tool
8. Working platform: aluminum plate platform
9. Engraving area: 500mmx300mm
10. Data transfer: USB2.0, network connection, offline U disk
11. .Engraving cutting depth: 1-10mm
12. Name of the software: Ruida
13. Laser power: 50W
14. Engraving speed: 0-800mm / s