4 Beam compression technology, 20W ultra-strong optical power laser module? It is the most powerful blue laser head on the market. Cut through 10mm bass plywood by one pass. Cut through 20mm pine plywood by 2 passes.Cut through 5mm MDF by one pass. Cut through 8mm black acrylic by one Pass. With air nozzle to get clean-cut edges?
When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting performance and reducing the burn marks. Stable optical output power to keep stable cutting ability.
Effectively cool down to extend service life. The length of the laser line is 80cm, the terminals are 4P-3P, 3P is connected to the control board, and 4p is connected to the laser?
Only 300400mw power decrease with 100% power output in 30mins? Include a 33mm Lifting, compatible with various DIY cutting engraving machines? Laser Spot :0.08 0.10mm.
Note: It needs to be used with 24V 5A power supply. With cross laser positioning, easy connection, you can see where the laser is located. Make work safer and more efficient.
Convert 12V To 24V, Or Convert 24V To 12V. 2pin, 3pin, 4pin Input Can Be Converted To 3pin Output. In This Way, Engraving Machines And Lasers With Different Voltages And Interfaces Can Be Compatible With Each Other. The laser light emitted by the laser module is likely to injure persons'eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
Laser module needs an appropriate laser driver(PCB). When the laser module connects with power supply, please set the output voltage to zero. The adjustment of the current should be slowly increased or decrease to avoid damaging the device. Keep the device working or storing in a dry environment.
The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape. Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device. When output power is higher than it's specific parameter of operation, it will accelerate the aging of the device. When the operation temperature of the laser diode is over 70degree, please do well heat dissipation of it. This laser module is an electrostatic sensitive device.Please make sure ground yourself or wear an antistatic wrist strap before you take it. This item is in the category "Business, Office & Industrial\Healthcare, Lab & Dental\Medical/Lab Equipment Attachments & Accessories\Lamps, Bulbs & Laser Components\Laser Modules & Heads". The seller is "cronostools" and is located in this country: CN. This item can be shipped worldwide.