10W Optical Output Power Laser Module for CNC 3018 Machine DIY Engraver/Cutting

  
Compatible with 10W optical power laser module for CNC 3018 Machine. 0W Laser Module for CNC. The optical power of laser module is 10W+. It has 0.08mm sharp compressed focal point and 0.01mm engraving accuracy. The cutting speed is faster, and the engraving accuracy is higher.

The fixed focus distance is 20mm. At the same power, this laser module can cut 4mm wood perfectly at once. It is ideal for e. Ngraving and cutting many different materials such as plywood, bamboo, cardboard, acrylic, MDF, etc. Equipped with high-quality aluminum heatsink and cooling fan, this can help the heat dissipate faster and ensure the module works continuously.

This laser module can work at full power for 8 hours. The service life can be up to 10,000 hours. Our laser module is compatible with LaserGRBL, LightBurn and most engraving software. LaserGRBL software is compatible with Windows system, LightBurn is compatible with Mac OS and Windows system.

Compatible with engraving machines and CNC milling machines 3018 series. Upgraded 6mm diameter air nozzle has an advanced hydrodynamic design, which better reduces air resistance and faster jet airflow.

Th Air Assist VS No. Blowing through the air nozzle to get clean-cut edges, improve cutting performance. Without Air Nozzle: Scorched Edges.

With Air Nozzle: Clean-Cut Edges. Cut 8mm plywood: 120mm/min, 100% power.

Cut 15mm Pinewood: 50mm/min, 100% power. Cut 5mm black acrylic : 50mm/min, 100% power. Dual-LDs With Beam Compressed Technology.

One laser module has two built-in laser diodes. The optical power of each diode is 5W.

With beam combination technology, our laser module is double powerful and the beam quality is as good as a single diode.